THE SPECIFIER’S NOTEBOOK
Practical reading on grab bars, wall construction and accessibility documentation. Each guide identifies the market it covers.
Which official sources to consult when planning an accessible shower in Germany, and what to coordinate between fixtures, rails, seating and the wall structure before ordering.
Read the guideA flip-up grab bar can solve transfer and clearance conflicts in a US commercial washroom, but only if the layout, locking mechanism and wall assembly are specified together.
Read the guideA guide to the ADA sections that apply when a shower seat must support compliance in a US commercial shower, including clearances, grab bar coordination and documentation.
Read the guideFor US facility managers: why commercial grab bar specification demands more than a residential product, covering duty, wall assemblies, documentation and procurement questions.
Read the guideA project checklist for citing the correct ADA sections, documenting grab bar compliance and recording evidence in submittals on a US commercial fit-out.
Read the guideHow to coordinate toilet grab rails with room layout and transfer space in non-domestic buildings in England, and where to direct detailed layout questions.
Read the guideBefore a qualified installer selects a fixing system for retrofit grab rails, the survey must capture hidden construction. Here is what to record and document.
Read the guideA practical template for specifiers preparing OEM enquiries for stainless steel grab rails in UK commercial washroom projects, covering drawings, finish references and documentation requests.
Read the guideHow to plan grab bars for older users in US commercial washrooms, why transfer habits differ, and where to confirm the 2010 ADA Standards requirements.
Read the guideWhy the bracket, fasteners and supporting wall should be reviewed as one assembly under US ADA section 609.8, and what evidence to request from suppliers.
Read the guideHow to convert a commercial washroom layout into a useful grab-bar enquiry: fixture types, substrate, finishes and the documentation to request.
Read the guideBefore checking ADA grab bar height in US projects, confirm the fixture type, user group, finished surfaces and the applicable sections of the 2010 ADA Standards.
Read the guideFor US commercial washroom projects, compare freestanding toilet safety frames with wall-mounted grab rails across space, mounting, transfer needs and assessment steps.
Read the guideHow to specify a stainless steel finish for commercial washroom grab bars, what maintenance questions to ask, and which ADA requirements still govern the hardware.
Read the guideHow to structure a procurement brief for a Doc M pack in England, separating Approved Document M guidance from product certification and asking suppliers the right questions.
Read the guideA pre-installation handoff checklist for specifiers and installers: substrate, backing, layout, and manufacturer instructions under the 2010 ADA Standards.
Read the guideIn the US, “ADA compliant” describes how a grab bar meets the 2010 ADA Standards. Learn what documentation to request from suppliers and what proves an installed assembly.
Read the guide
